The Cadac Swivel Regulator (Horizontal) is a high-precision gas control device engineered for the safe management of LPG (Liquid Petroleum Gas) flow from vertical cylinders to domestic and industrial appliances. Designed with a 90-degree swivel mechanism, this regulator is essential for installations where space is limited or where a flexible hose orientation is required to prevent "kinking" or strain on the gas line.
Technical Specifications
- Gas Type: LPG (Liquid Petroleum Gas).
- Inlet Connection: 5/8" Right-Hand (Standard Bullnose / G.5 profile).
- Outlet Connection: 8mm – 10mm Hose nozzle (Barbed).
- Operating Pressure: Low pressure (Fixed 2.8kPa output).
- Capacity: Typically rated for 1.0kg/hr – 1.5kg/hr flow rate.
- Construction: Heavy-duty Zinc Alloy body with a brass swivel inlet.
Key Performance Features
- 360-Degree Swivel Inlet: The unique swivel design allows the regulator to rotate independently of the gas hose. This ensures the hose can be positioned naturally without twisting, which significantly extends the lifespan of the rubber and prevents gas flow restrictions.
- Precision Pressure Regulation: Engineered to drop high-pressure cylinder gas to a constant 2.8kPa. This provides a steady, safe flame for gas heaters, boiling tables, and skottels, preventing "flame-outs" or dangerous flare-ups.
- Bullnose Safety Seal: Features a high-grade integrated rubber "nose" seal (bullnose) that creates a gas-tight compression fit against the cylinder valve. This reduces the risk of leaks compared to older, flat-washer systems.
- Corrosion-Resistant Finish: The alloy housing is treated to withstand high-moisture and outdoor environments, making it suitable for both indoor gas heaters and outdoor catering setups.
- Compact Geometry: The horizontal profile is designed to sit low on the cylinder, making it easier to fit cylinders into tight cupboards or under workstation counters.
Professional Safety & Usage Tips
- Leak Testing: CRITICAL. After every cylinder exchange, apply a soapy water solution to the regulator-to-cylinder connection. If bubbles form, close the valve immediately and check the seal. Never use a flame to test for leaks.
- Left-Hand Thread Rule: Remember that the Bullnose nut uses a Left-Hand Thread. To tighten, you must turn it Counter-Clockwise. Use a dedicated gas spanner or a Cadac Control Key for a secure fit—do not over-tighten, as this can crush the internal rubber seal.
- Hose Inspection: Ensure the gas hose is secured to the regulator nozzle using a stainless steel hose clamp (worm-drive). Periodically inspect the hose for "cracking" or stiffness, especially if exposed to direct sunlight or red dust.
- The "5-Year" Rule: Regulators are wear-and-tear items. For safety compliance, it is professionally recommended to replace your gas regulator every 5 years, even if it appears to be functioning correctly.
- Storage: When the cylinder is not in use, close the main cylinder valve. Do not rely on the appliance knobs alone to hold the pressure against the regulator diaphragm for long periods.
Common Use Cases
- Indoor Heating: Connecting 9kg or 14kg cylinders to roll-about gas heaters.
- Commercial Catering: Powering high-output gas burners and griddles in mobile kitchens.
- Agricultural Utility: Managing gas-powered water heaters or small-scale drying equipment.
- Domestic Cooking: Reliable connection for gas hobs and ovens where the cylinder is housed in a nearby cabinet.
Pro Tip: If you are operating in colder Winter 2026 temperatures, you may notice "frosting" on the regulator body during high gas usage. This is a normal thermodynamic reaction, but if the frost is excessive, it may indicate a flow rate that is too high for the regulator's capacity. Always keep a spare Bullnose Rubber Seal in your Wildebees utility kit; a 50c part can prevent a total work stoppage during a critical installation.



